A safe, efficient, and accurate way to obtain 3D nuclear radiation dose rate distribution. Assess the scene from a safer distance.
FLIR Muvetm C360 Chemical Hazards Detect
The FLIR MUVETMC360 is a multi-gas detector completely integrated with an unmanned aerial system (UAS) to provide real-time continuous monitoring of chemical hazards while on the move.
The FLIR MUVETMC360 is a multi-gas detector completely integrated with an unmanned aerial system (UAS) to provide real-time continuous monitoring of chemical hazards while on the move.
ASSESS THE SCENE FROM A SAFE DISTANCE
Before putting the health and safety of your team at risk, fly the C360 into the scene to gather initial assessment of hazards.
SIGNIFICANTLY REDUCE THE TIME TO ACTION
Locate and identify chemical hazards before you go in. Access hard to reach locations. Define a safety perimeter.
FULLY INTEGRATED SITUATIONAL AWARENESS
Get a comprehensive overview of an active scene including visuals and chemical identification.
- Sensors: CO, Cl₂, O₂, NO₂, H₂S, SO₂, LEL
PID: VOC 10.6 eV (ppm)
Total Weight Payloa: 1.5 lb (680.39 g) – C360 with dock and snorkel
DEPLOYMENT OPTIONS
Sensor Block Technology
Proprietary automatic calibration design, includes tubing and power adaptor
ENVIRONMENTAL
Operating Temp & Humidity
-4 to 122 °F (-20 to 50 °C) 10 to 93%, non-condensing
- Storage Temperature
-22 to 158 °F (-30 to 70 °C)
- Environmental Protection
- IP43-rated
PHYSICAL FEATURES
Dimensions (L x W x H)
6.5 x 2.3 x 2.0″ (16.51 x 5.84 x 5.08 cm) – C360 only
- Integration Dock
Proprietary quick-connect mount for UAS and FLIR Calibration Station
POWER
Cold Start Time
90 seconds from cold start
- Input Voltage
24V DJI Matrice 210; 12V FLIR Calibration Station
SAMPLING & ANALYSIS
- Sample Introduction
Actively pumped via integrated snorkel
- Sampling & Analysis
- Real-time detection
- Sampling Rate
- 300 ml/min minimum
- SYSTEM INTERFACE
- Communication
Remote controller via USB-A accessory (tablet); UAS power port and serial (C360)
- Data Storage
- Sensor data and flight information logged on tablet
- Training Requirements
- <30 mins for operator; 4 hours for advanced user
- Wireless Range
- Determined by the UAS range
- Display & Alerts
- FLIR VueLink™ application integrated via tablet connected to the UAS remote controller
Сompatible with DJI Matrice 210, V1 and V2, M300RTK M200 series
Real-time detection
<30 mins for operator; 4 hours for advanced user
CO, Cl2, O2, NO2, H2S, SO2, LEL
VOC 10.6 eV (ppm)
1.5 lb (680.39 g) – C360 with dock and snorkel
Extra-lightweight GPR system, suitable for medium-sized drones like DJI M300 RTK.
Comes with 3x sets of dipoles for the 300, 150, and 100 MHz.
Utilizes Real Time Sampling (RTS) with high hardware stacking, delivering high-resolution low-noise data.
Laser Falcon is sensitive only to methane, so no false readings of other gases are possible. It is a class 3R eye-safe laser.
The concept is based on Infrared Absorption Spectroscopy. The laser emits light (spectral range of 1,65 μm), which reflects back and is captured by the sensor. The outgoing and incoming signals are compared with the built-in reference cell. If methane is present along the laser path, the laser light is partially absorbed. An algorithm calculates the gas concentration in ppm×m (parts per million multiplied by meter). The value is instantly transferred to the remote control (RC) of the drone pilot and to UgCS software.
EchoLogger ECT 400S echo sounder with tilt and temperature sensor, harness, housing, and mountings for the drone.
HS Code: 90158040 (hydrographic instruments)
EchoLogger ECT D052S dual-frequency echo sounder with tilt and temperature sensor, harness, housing, and mountings for the drone.
HS Code: 90158040 (hydrographic instruments)