Serves as a base station for centimeter-level positioning of multiple drones simultaneously, or as a relay station to extend drone range.
Raptor SR Designed for DJI Matrice series
Features:
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
- No drilling required
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
DJI Matrice is a model that is best known for its industrial usage with a big payload with long flight time. the drone is equipped with exceptional obstacle and aircraft detection systems. It is also possible to operate the drone with two controllers. The basic kit allows for up to 38 minutes of uninterrupted flight, maximum speed of 65km/h.
4Hawks antenna for DJI Matrice model is operating in 2.4GHz with 9dBi gain and 5.8Gz with 10 dBi Gain additional antenna installed inside controller working in 5GHz frequency that allows operating the drone with 2 controllers. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability.
Modifying the controller might require an assistance of a professional.
Specification
electrical & mechanical parameters of Raptor renge extender.
Electrical parameters
Frequencies
Port 1: 2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Port 2: 2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Port 2: 2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Gain
Port 1: 9 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2: 9 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2: 9 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
VSWR
Port 1: < 1.50 (max. < 2.30)
Port 2: < 1.50 (max. < 2.30)
Port 2: < 1.50 (max. < 2.30)
Beamwidth
Port 1: 90°/65° & 55°/55°
Port 2: 90°/65° & 55°/55°
Port 2: 90°/65° & 55°/55°
Polarization
Port 1: Vertical
Port 2: Vertical
Port 2: Vertical
Impedance
Port 1: 50 Ω
Port 2: 50 Ω
Port 2: 50 Ω
Mechanical parameters
Material
Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, FR4 PCB
Mounting: Stainless steel + paint
Mounting: Stainless steel + paint
Weight
~ 200g (110g Antenna + 90g Mounting)
Dimensions
16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch
6.34 x 3.60 x 0.67 inch
Connection
Port 1: RP-SMA female
Port 2: RP-SMA female
Port 2: RP-SMA female
Tilt adjustment
5 tilt positions, OnClick system
Mounting type
QuickAttach
Based on 0 reviews
Be the first to review “Raptor SR Designed for DJI Matrice series”
You must be logged in to post a review.
Empowers DJI equipment to access 4G networks, enabling connectivity services, Enhanced Transmission, and additional features.
High-bright display. IP54 protection rating. O4 Enterprise video transmission. Support for both SDR and 4G hybrid transmission.
DJI Matrice 400, the enterprise flagship drone platform, boasts an impressive 59-minute flight time, a payload capacity of up to 6 kg, and integrated rotating LiDAR and mmWave radar for power-line-level obstacle sensing. It also supports the O4 Enterprise Enhanced Video Transmission and Airborne Relay Video Transmission, ensuring safer handling and easier operations. Combining Smart Detection with visible and thermal imaging, AR projection, ship-based takeoff/landing, and advanced automation, Matrice 400 excels in emergency response, power inspections, mapping, and AEC.
The all-weather, multi-sensor flagship Zenmuse H30 Series integrates five major modules—a wide-angle camera, a zoom camera, an infrared thermal camera, a laser range finder, and an NIR auxiliary light. Employing cutting-edge intelligent algorithms, it revolutionizes perception and imaging standards, transcending the limitations of day and night vision. This makes it effortlessly suitable for a variety of operations, including public safety, energy inspection, water conservation, and forestry.
There are no reviews yet.