DJI Ronin M

  • Total weight of 2.3 kg (5.07 lb.)
  • Support cameras up to 3.6 kg (8 lb.)
  • Precision of Control: ±0.02°
  • Tool-Less Balance Adjustment System
  • Transmitter for Remote Pan/Tilt Control
  • Silent mode for quiet operation
  • USB and Power Tap Power Outputs
  • Assistant Software for iOS and Windows
  • Bluetooth Wireless Interface for Setup

Category

General

Built-In Functions
  1. Three Operation Modes
    · Underslung Mode
    · Upright Mode
    · Briefcase Mode
  2. Built-in, independent IMU module
  3. DJI Specialized Gimbal Drive Motors with Encoders
  4. Bluetooth Module
  5. USB Connection
  6. 2.4GHz Receiver
  7. Temperature Sensor
  8. DJI Advanced 32-Bit DSP Processor
  9. D-Bus Receiver Supported

Peripheral

Camera Tray Dimensions
Maximum depth at center of mass on camera base plate: 120mm
Maximum height measured from top of camera base plate: 195mm
Maximum width: 160mm
Accessory Power Connections
12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power
4S Ronin-M Battery
Connections
2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit);Mac OS X 10.9 or above
Mobile Assistant Software Requirements
Mobile Device: iOS 6.1 or above, Android 4.3 or above

Mechanical & Electrical Characteristics

Working Current
· Static current: 300mA (@16V)
· Dynamic current: 600mA (@16V)
· Locked motor current: Max 10A (@16V)
Operating Temperature
-15° C ~ 50° C (-5° F ~ 120° F)
Weight
2.3kg (5.07lb) fully loaded with handlebar
Gimbal Dimensions
500mm(W) x 210mm(D)x 420mm(H)

Working Performance

Load Weight (Reference Value)
3.6kg (8lb)
Angular Vibration Range
± 0.02°
Maximum Controlled Rotation Speed
· Pan axis: 90°/s
· Tilt axis: 100°/s
· Roll axis: 30°/s
Mechanical Endpoint Range
· Pan axis: 360°
· Tilt axis: +105° /-190°
· Roll axis: ± 110°
Controlled Rotation Range
· Pan axis control: 360°
· Tilt axis control: +105° /-190°
· Roll axis control: ± 25°
Category:

Based on 4 reviews

4.8 overall
3
1
0
0
0

Add a review

  1. Emir

    It’s weight is only 5 lb but it can support the camera up to 8 lb. I use it on an ongoing basis especially during too hard periods of shooting at our studio. The gimbals are very silent. It is quite easy to set the camera there. In any case, this is a solid piece of equipment for any video operator.

    Emir

  2. Umar

    This one is too weak for BMD cinema camera but in all the rest, it is great and very useful for me. Use it on an ongoing basis, this is a very useful thing for my work. I ordered it from this store and received my order in several days after purchase.

    Umar

  3. Zafar

    I am the owner of a production company. So Ronin M was a must for my video operators. Maybe it is a little bit heavy but it is of high-quality for sure. There are lots of useful work modes. Besides, when you first start your work it takes a while to balance but later everything is ok. I don’t regret that I bought it.

    Zafar

  4. Ahmed

    It is not heavy and very easy to use. I didn’t face any issues with balancing. Everything is working properly. The gimbal work is also silent. I don’t regret about my purchase because I use it for several times per week for sure. It really simplifies my work.

    Ahmed

M30 PSDK ADAPTER BRACKET

The PSDK load can be fixed to the M30 series flight platform, and different types of PSDK loads can be quickly removed and replaced.

Buy
FC30 EQUIPPED WITH A THREE-LOAD SUPPORT

The FC30 EQUIPPED WITH A THREE-LOAD SUPPORT is designed for the DJI FlyCart 30 carrier and can support up to three ET4 FOUR DROP KIT at the same time, achieving 12-stage drops with a maximum payload of 120kg.

Buy
SDK PAYLOAD BRACKET(OSDK)

Extended based on the Warp M350 RTK E-Port interface, the load can be mounted to the belly of the Warp M350 RTK aircraft, supporting up to OT series devices.

Buy

Inquire price for

    ×