- High Precision
- Exceptional Efficiency
- Superior Penetration
- 250m/450m Detection Range
- 5 Returns
- Turnkey Solution
- Point Cloud LiveView
- One-Click Processing on DJI Terra
- Sorry, this product cannot be purchased.
Raptor XR Designed for DJI Phantom 4 Pro
Features:
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
- No drilling required
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
DJI Phantom 4 Pro is a model designed for professionals. The basic kit allows for 30 minutes of uninterrupted flight, maximum speed of 72km/h.
With 4Hawks range extender antenna ability to work at 2 frequencies at the same time, DJI Phantom 4 Pro receives a great boost to its overall performance, by enhancing signal from oblique antenna signals that ignore noise exceptionally well – this in return allows Phantom 4 Pro to maximize its range in noisy areas. What’s more 4Hawks antenna also increases the range of DJI Phantom 4 Pro significantly, so the drone can reach even further than ever before.
Last but not least, with 4Hawks range extender, the video quality is always glitch free, thanks to a strong, uninterrupted signal.
Specification
electrical & mechanical parameters of Raptor renge extender.
Electrical parameters
Frequencies
Port 1: 2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Port 2: 2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Port 2: 2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Gain
Port 1: 11 dBi (+/- 1 dBi) & 14 dBi (+/- 1 dBi)
Port 2: 11 dBi (+/- 1 dBi) & 14 dBi (+/- 1 dBi)
Port 2: 11 dBi (+/- 1 dBi) & 14 dBi (+/- 1 dBi)
VSWR
Port 1: < 1.50 (max. < 2.00)
Port 2: < 1.50 (max. < 2.00)
Beamwidth
Port 1: 70°/40° & 40°/25°
Port 2: 70°/40° & 40°/25°
Port 2: 70°/40° & 40°/25°
Polarization
Port 1: Vertical
Port 2: Vertical
Port 2: Vertical
Impedance
Port 1: 50 Ω
Port 2: 50 Ω
Port 2: 50 Ω
Mechanical parameters
Material
Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
Mounting: Stainless steel + paint
Mounting: Stainless steel + paint
Weight
~ 540g (450g Antenna + 90g Mounting)
Dimensions
29.2 x 18.2 x 2.1 cm
11.50 x 7.16 x 0.83 inch
11.50 x 7.16 x 0.83 inch
Connection
Port 1: RP-SMA female
Port 2: RP-SMA female
Port 2: RP-SMA female
Tilt adjustment
5 tilt positions, OnClick system
Mounting type
On SMA connectors (Permanent)
| Model | Black, White |
|---|
Based on 0 reviews
Be the first to review “Raptor XR Designed for DJI Phantom 4 Pro”
You must be logged in to post a review.
The PSDK load can be fixed to the M30 series flight platform, and different types of PSDK loads can be quickly removed and replaced.
The PSDK load can be fixed to the M30 series flight platform, and different types of PSDK loads can be quickly removed and replaced.
The PSDK load can be fixed to the warp and weft M350 RTK flight platform, and different types of PSDK loads can be quickly removed and replaced.
The FC30 EQUIPPED WITH A THREE-LOAD SUPPORT is designed for the DJI FlyCart 30 carrier and can support up to three ET4 FOUR DROP KIT at the same time, achieving 12-stage drops with a maximum payload of 120kg.
There are no reviews yet.