Raptor SR Designed for Yuneec Typhoon H

Features:

  • Plug & Play
  • Adjustable tilt of the range extender
  • No modification to the drone or to the controller
  • Long range extension without external boosters
  • Complete solution

Yuneec Typhoon H is one of the flagship models of this producer. With six-rotor design, the drone maintains a very good stability throughout the flight. The basic kit allows for up to 25 minutes of uninterrupted flight, maximum speed of 60km/h as well as maximum distance of around 0,7 kilometers.
The greatest advantage of 4Hawks antenna is that it significantly increases  the range of Yuneec Typhoon H, so the drone can reach much further than it initially can.
4Hawks antenna for Yuneec Typhoon H  model is operating in 2.4GHz with 9dBi gain as well as 5GHz frequency with 14dBi gain. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability.
With plug-and-play construction of 4Hawks antenna, mounting was never as easy as now. The entire set is lightweight and uniform. Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click” to 5 different positions. This way you can be sure that you do not lose the connection with your drone.

Specification

electrical & mechanical parameters of Raptor renge extender.

Electrical parameters

Frequencies
Port 1:   2.40 – 2.50 GHz
Port 2:   4.90 – 5.90 GHz
Port 3:   2.40 – 2.50 GHz
Gain
Port 1:   9 dBi  (+/- 1 dBi)
Port 2:   14 dBi  (+/- 1 dBi)
Port 3:   9 dBi  (+/- 1 dBi)
VSWR
Port 1:   < 1.50  (max. < 2.30)
Port 2:   < 1.50  (max. < 1.70)
Port 3:   < 1.50  (max. < 2.30)
Beamwidth

Port 1:   70°/65°
Port 2:   35°/40°
Port 3:   70°/65°

Polarization
Port 1:   Vertical
Port 2:   Vertical
Port 3:   Vertical
Impedance
Port 1:   50 Ω
Port 2:   50 Ω
Port 3:   50 Ω

Mechanical parameters

Material
Antenna:   Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, FR4 PCB
Mounting:   Stainless steel + paint
Weight
~ 200g (120g Antenna + 80g Mounting)
Dimensions
16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch
Connection
Port 1:   RP-SMA female
Port 2:   RP-SMA female
Port 3:   RP-SMA female
Tilt adjustment
5 tilt positions, OnClick system
Mounting type
Attach to the controller by one screw (Removable)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Raptor SR Designed for Yuneec Typhoon H”

There are no reviews yet.

M30 PSDK ADAPTER BRACKET

The PSDK load can be fixed to the M30 series flight platform, and different types of PSDK loads can be quickly removed and replaced.

Buy
FC30 EQUIPPED WITH A THREE-LOAD SUPPORT

The FC30 EQUIPPED WITH A THREE-LOAD SUPPORT is designed for the DJI FlyCart 30 carrier and can support up to three ET4 FOUR DROP KIT at the same time, achieving 12-stage drops with a maximum payload of 120kg.

Buy
SDK PAYLOAD BRACKET(OSDK)

Extended based on the Warp M350 RTK E-Port interface, the load can be mounted to the belly of the Warp M350 RTK aircraft, supporting up to OT series devices.

Buy

Inquire price for

    ×