- High Precision
- Exceptional Efficiency
- Superior Penetration
- 250m/450m Detection Range
- 5 Returns
- Turnkey Solution
- Point Cloud LiveView
- One-Click Processing on DJI Terra
- Sorry, this product cannot be purchased.
FLIR Muvetm C360 Chemical Hazards Detect
The FLIR MUVETMC360 is a multi-gas detector completely integrated with an unmanned aerial system (UAS) to provide real-time continuous monitoring of chemical hazards while on the move.
The FLIR MUVETMC360 is a multi-gas detector completely integrated with an unmanned aerial system (UAS) to provide real-time continuous monitoring of chemical hazards while on the move.
ASSESS THE SCENE FROM A SAFE DISTANCE
Before putting the health and safety of your team at risk, fly the C360 into the scene to gather initial assessment of hazards.
SIGNIFICANTLY REDUCE THE TIME TO ACTION
Locate and identify chemical hazards before you go in. Access hard to reach locations. Define a safety perimeter.
FULLY INTEGRATED SITUATIONAL AWARENESS
Get a comprehensive overview of an active scene including visuals and chemical identification.
- Sensors: CO, Cl₂, O₂, NO₂, H₂S, SO₂, LEL
PID: VOC 10.6 eV (ppm)
Total Weight Payloa: 1.5 lb (680.39 g) – C360 with dock and snorkel
DEPLOYMENT OPTIONS
Sensor Block Technology
Proprietary automatic calibration design, includes tubing and power adaptor
ENVIRONMENTAL
Operating Temp & Humidity
-4 to 122 °F (-20 to 50 °C) 10 to 93%, non-condensing
- Storage Temperature
-22 to 158 °F (-30 to 70 °C)
- Environmental Protection
- IP43-rated
PHYSICAL FEATURES
Dimensions (L x W x H)
6.5 x 2.3 x 2.0″ (16.51 x 5.84 x 5.08 cm) – C360 only
- Integration Dock
Proprietary quick-connect mount for UAS and FLIR Calibration Station
POWER
Cold Start Time
90 seconds from cold start
- Input Voltage
24V DJI Matrice 210; 12V FLIR Calibration Station
SAMPLING & ANALYSIS
- Sample Introduction
Actively pumped via integrated snorkel
- Sampling & Analysis
- Real-time detection
- Sampling Rate
- 300 ml/min minimum
- SYSTEM INTERFACE
- Communication
Remote controller via USB-A accessory (tablet); UAS power port and serial (C360)
- Data Storage
- Sensor data and flight information logged on tablet
- Training Requirements
- <30 mins for operator; 4 hours for advanced user
- Wireless Range
- Determined by the UAS range
- Display & Alerts
- FLIR VueLink™ application integrated via tablet connected to the UAS remote controller
Сompatible with DJI Matrice 210, V1 and V2, M300RTK M200 series
Real-time detection
<30 mins for operator; 4 hours for advanced user
CO, Cl2, O2, NO2, H2S, SO2, LEL
VOC 10.6 eV (ppm)
1.5 lb (680.39 g) – C360 with dock and snorkel
The PSDK load can be fixed to the M30 series flight platform, and different types of PSDK loads can be quickly removed and replaced.
The PSDK load can be fixed to the M30 series flight platform, and different types of PSDK loads can be quickly removed and replaced.
The PSDK load can be fixed to the warp and weft M350 RTK flight platform, and different types of PSDK loads can be quickly removed and replaced.
The FC30 EQUIPPED WITH A THREE-LOAD SUPPORT is designed for the DJI FlyCart 30 carrier and can support up to three ET4 FOUR DROP KIT at the same time, achieving 12-stage drops with a maximum payload of 120kg.
