DJI E-Port V2 Development Kit Matrice 400

Converts the aircraft’s E-Port V2 into multiple standard hardware interfaces and features an onboard MCU, making it easy for developers to connect hardware devices and perform SDK development and debugging.

1. If integrating the adapter board into a finished payload, be sure to design a heat sink and metal enclosure.
2. If you notice sparks, smoke, burning smell, or other abnormalities after powering on the adapter board, immediately turn off the power.
3. When using all three XT30 power output ports simultaneously, the total output power must be less than the aircraft’s maximum single-port output. Always develop payloads within the specified output limits.

In The Box

• DJI E-Port V2 Development Board × 1
• DJI E-Port V2 Coaxial Cable × 1
• XT30 to DC5.5 Power Cable × 1
• XT30 to USB-C Power Cable × 1
• SKYPORT V3 Coaxial Cable × 1
• SKYPORT V3 Coaxial Cable Connector Terminal × 2
• SKYPORT V3 Adapter × 1
• X-Port Adapter Board × 1
• X-Port Electronic Cable × 1

Compatibility

DJI Matrice 400