DJI D-RTK Mounting Bracket for Matrice 600 Series Aircraft

  • Mount D-RTK System to Aircraft
  • Expansion Plate, Brackets, and Hardware
  • Screwdriver Required

Categories ,

This DJI Mounting Bracket allows you to install your D-RTK system onto your Matrice 600-series aircraft. The bracket and included hardware should only be used for aircraft installation and only after you have successfully completed the ground system installation.

The D-RTK Mounting Bracket consists primarily of an upper expansion plate, brackets, antenna brackets, and clips. Installation screws and double-sided tape are included. A screwdriver is required.

In the Box

DJI D-RTK Mounting Bracket for Matrice 600 Series Aircraft
  • Upper Expansion Plate
  • 4 x Antenna Brackets
  • 2 x Antenna Clip
  • 2 x Assistant Bracket
  • 4 x Brackets
  • 2 x Sets of Installation Screws
Categories: ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DJI D-RTK Mounting Bracket for Matrice 600 Series Aircraft”

There are no reviews yet.

M30 PSDK ADAPTER BRACKET

The PSDK load can be fixed to the M30 series flight platform, and different types of PSDK loads can be quickly removed and replaced.

Buy
FC30 EQUIPPED WITH A THREE-LOAD SUPPORT

The FC30 EQUIPPED WITH A THREE-LOAD SUPPORT is designed for the DJI FlyCart 30 carrier and can support up to three ET4 FOUR DROP KIT at the same time, achieving 12-stage drops with a maximum payload of 120kg.

Buy
SDK PAYLOAD BRACKET(OSDK)

Extended based on the Warp M350 RTK E-Port interface, the load can be mounted to the belly of the Warp M350 RTK aircraft, supporting up to OT series devices.

Buy

Inquire price for

    ×