Highlights
- The spotlight supports two modes: always-on and strobe, providing clear illumination of subjects. It also links with the gimbal.
- When installing the spotlight on drones, tighten the screws and ensure proper sealing of the interface. When using for long-term or with DJI Dock, use the included hex key to tighten the screws again.
- When installed on Matrice 4D Series drones, please remove the adapter bracket at the bottom.
- After installation, connect to the internet to activate the spotlight as instructed. If there is a firmware update notification, update to the latest firmware promptly.
- After installing the spotlight, the obstacle avoidance performance on the left and right sides of Matrice 4 Series drones will be reduced, and the upward obstacle avoidance of Matrice 4D Series drones will be disabled. Additionally, the drones’ power performance will be affected. Please ensure flight safety.
- When the spotlight is turned on, the obstacle avoidance function will deactivate automatically. Please ensure flight safety.
- DO NOT point the spotlight directly at people’s eyes.
- The spotlight may become hot after prolonged operation. Please be careful to avoid burns.
In The Box
- Spotlight × 1
- Spare Screw × 2
- Hex Key × 1
Compatibility
- Support for use with DJI Matrice 4 Series aircraft
Specs
Weight91 g (excluding bracket)
Dimensions79 × 164 × 28 mm
Maximum Power32 W
Illuminance @100m4.3 ± 0.2 lux
Illuminance @50m17 ± 0.2 lux
Effective Illumination Angle23° (10% relative)
Illumination Area (Normal)1,300 m² @100m
Illumination Area (Wide FOV)2,200 m² @100m
ModesAlways-on, Strobe
Gimbal Mechanical RangeTilt: -140° ~ +50°
Gimbal Controllable RangeTilt: -90° ~ +35°
Max Control Speed120°/s (tilt)
Gimbal Alignment Accuracy±0.1°
Operating Temperature-20°C ~ +50°C
Mounting MethodQuick-release hand-tightened screws
Protection RatingIP55 (with Matrice 4D Series)
Category: Uncategorized






